top of page

Pneumatic Grippers – A Question of the Right Technology

Nov 9
6 min read

Whether handling heavy machine components, delicate workpieces or complex geometries, industrial material handling presents numerous challenges that can be addressed using pneumatic grippers.


They enable a wide variety of workpieces to be picked up, moved and positioned safely and can be individually adapted to suit specific requirements.


Unlike magnetic grippers, pneumatic grippers are not limited to ferromagnetic materials. Their strength lies in the versatility of mechanical gripping solutions.


Particularly when combined with electronic rope balancers, even heavy or awkward components can be moved in a controlled manner with minimal physical effort.


Form-Fit or Force-Fit – How Should the Workpiece Be Gripped?

Before a pneumatic gripper can be designed, one fundamental question needs to be answered: How can the workpiece be gripped safely?


There are two main gripping principles:

  • Force-fit gripping: The workpiece is held by a defined clamping force. The holding force is generated by friction between the gripping surfaces and the workpiece.

  • Form-fit gripping: The gripping elements make use of the workpiece geometry, such as existing contours, recesses or undercuts. The load is supported through positive mechanical engagement.


Depending on the application, both principles can also be combined.


The most suitable solution depends on several factors, including the geometry, weight, surface characteristics and available gripping points of the workpiece.


Protecting sensitive workpiece surfaces is another important consideration. For example, suitably designed gripping jaws with plastic coatings can help prevent pressure marks or damage.


Only once it has been established where and how the workpiece can be safely gripped can the appropriate gripping mechanism be selected.


How Do Pneumatic Grippers Work?

The basic principle is straightforward: compressed air generates a mechanical movement that allows a workpiece to be gripped and held.


Different gripping mechanisms are used depending on the application. These include parallel grippers, individually designed external grippers and internal expanding mandrel grippers.


Parallel grippers feature jaws that move parallel to one another. They are suitable for handling housings, profiles, cylindrical components or workpieces with appropriately positioned opposing gripping surfaces.


Custom-designed external grippers are specifically adapted to the geometry of the workpiece. Depending on the application, they may incorporate gripping jaws, clamping arms or other mechanical gripping elements.


Internal expanding mandrel grippers, on the other hand, make use of existing openings in the workpiece. The gripper is inserted into an opening, for example a circular bore. During the clamping process, pneumatically actuated elements expand outwards to grip the workpiece from within. This technique is suitable for rings, sleeves and other components with corresponding openings.


The choice of gripper design always depends on the characteristics of the workpiece and the requirements of the handling process.


Which Workpieces Can Be Handled Using Pneumatic Grippers?

Pneumatic grippers offer a wide range of applications. They can be used to handle workpieces made from different materials and with a variety of shapes and sizes, including:

  • Housings and machine components

  • Pipes and profiles

  • Rings and sleeves

  • Castings and forgings

  • Plastic components

  • Components with complex geometries


– to name just a few examples.


The decisive factor is not so much the material itself, but whether the workpiece can be safely gripped and held at suitable points.


Fig. 1 | Examples of pneumatic gripping solutions


Advantages of Pneumatic Grippers in Manual Material Handling

Quick and Easy Load Pick-UpPneumatic grippers allow workpieces to be picked up and released through a controlled gripping movement.


Time-consuming manual operations, such as attaching chains, engaging hooks or fitting mechanical clamping devices, can therefore be eliminated.


Particularly in repetitive handling processes, this can simplify workflows and reduce cycle times.

 

Ergonomic WorkingHeavy, bulky or awkward workpieces often place considerable physical demands on employees.


Pneumatic grippers take over the task of mechanically holding the load. This means operators no longer have to grip or secure the workpiece using their own muscular strength.


When combined with an electronic rope balancer, the weight of the load is also compensated for. Workpieces can be moved with virtually no perceived weight, guided in a controlled manner and positioned precisely.


This reduces physical strain and allows operators to work with less fatigue.

 

Intuitive Operation – Adapted to the WorkplaceWorkplace ergonomics also depend on how easily the gripper can be operated.


Gripping and releasing the workpiece is controlled using function buttons, which are located either directly on the balancer's control unit or on external operating handles.


External operating handles are particularly beneficial when handling large components, working at different heights or inserting workpieces into machines. They can be positioned so that the function buttons remain easily accessible to the operator, allowing for ergonomic handling.


This means that not only the load itself, but also the way it is controlled, can be adapted to the specific workplace.

 

Precise Workpiece GuidanceIn many handling processes, it is not enough simply to pick up a workpiece safely. It must also be held in a defined position and aligned accurately.


The gripper design therefore takes into account where the workpiece can be gripped and how it needs to be oriented during handling. Appropriately designed gripping jaws, defined support surfaces or multiple gripping points can help ensure that the component remains stable and in the required position.


In combination with the lifting device, the load can then be guided in a controlled manner and positioned precisely. This is particularly beneficial when loading machines or accurately fitting components into place.

 

Safety Starts with the Design

For pneumatic grippers, safe load pick-up is a fundamental consideration from the very beginning of the design process.


In addition to selecting the appropriate gripping principle, several factors must be taken into account, including:

  • Weight and centre of gravity of the workpiece

  • Gripping position and arrangement of gripping points

  • Required gripping and holding forces

  • Operating pressure and compressed air supply

  • Surface characteristics and friction conditions

  • Dynamic loads, for example those caused by acceleration or swinging movements


Two questions require particular attention:


What happens if the compressed air supply fails?And how can the load be prevented from being released unintentionally?

 

Safe Load Retention in the Event of Compressed Air Failure

As pneumatic grippers operate using compressed air, the system's behaviour in the event of a pressure loss must be considered at the design stage.


Depending on the gripping principle and application, different safety measures may be required. These can include mechanical locking mechanisms, suitable pressure-retaining devices or gripping mechanisms that maintain their holding force even without operating pressure.


The essential requirement is that a failure of the compressed air supply must not result in an uncontrolled release of the load.


The appropriate safety measures must be assessed and designed for each individual application.

 

Release Only After the Load Has Been Safely Set Down

Another important safety consideration is the controlled release of the workpiece.


The rope balancer's load monitoring system performs an important safety function in this process.


The LiFTKON Wizard uses its load monitoring system to detect when the workpiece has been set down and the load has been relieved. Only then is the gripper's release function enabled.


As long as the workpiece is suspended and its weight is supported by the balancer, the release function remains disabled. This prevents the gripper from being opened unintentionally during lifting or transport.


The intelligent integration of gripper control and load monitoring therefore contributes to safe and controlled handling.

 

More Efficient Workflows

The advantages outlined above have a direct impact on operational efficiency. Pneumatic grippers can simplify handling processes and save valuable time.


Quick load pick-up, ergonomically adapted controls and precise workpiece guidance make repetitive handling operations easier.


Particularly where workpieces are changed frequently or lifting operations are repeated regularly, pneumatic grippers can help reduce cycle times and physical strain.

 

The Overall Solution Is What Matters

However well a pneumatic gripper is designed, a well-engineered handling solution can only be achieved when all components are carefully matched to one another.


This involves much more than simply picking up a workpiece safely. Movement sequences, the physical layout of the workplace and the operator's requirements must also be taken into account.


While the pneumatic gripper ensures that the workpiece is securely picked up and held, the rope balancer provides weight compensation and enables controlled load guidance.


Ergonomically positioned controls make handling easier, while coordinated safety functions support the entire working process.


Ultimately, it is not the individual component that matters, but how carefully all elements are tailored to the specific application. This results in solutions that meet both the technical requirements and the needs of the people working with them every day.


Pneumatic Three-Jaw Gripper – A Practical Example


Fig. 2 | Pneumatic three-jaw gripper


This pneumatic three-jaw gripper provides a practical example of what a customised gripping solution can look like.


The gripper is first lowered into the opening of the workpiece until it rests in position. An integrated sensor detects whether the component is correctly positioned for safe gripping. Only once the workpiece has been successfully detected is the 'Grip' function enabled.


When the operator presses the corresponding function button on the control unit, the three clamping jaws extend outwards and secure the workpiece from within.

The component can then be safely lifted and moved to the required position.


Unintentional release of the gripper during transport is prevented by the LiFTKON Wizard's load monitoring system. As long as the system detects that a load is being carried, the 'Release' function remains disabled. It is only re-enabled once the workpiece has been safely set down and the load has been relieved.


This example demonstrates how gripping technology, sensors and control systems are carefully coordinated to enable safe and controlled handling.

 

bp

 
 
 

Comments


bottom of page